Click here to see the F2 operations envelope.
DataStorm F2 Technical Specs
REFLECTOR TYPE
Efficiency: 70%
Midband Gain:(14.125 Tx, 11.725 Rx); RX-41.9 dBi, TX-43 dBi
Noise Temperature: Typical, 61K@10°EL, 53K@30°EL
Focal Length: 25 in/63.5 cm
f/D: 0.635
Offset Angle: 22°
Polarization: Transmitter Rotation (Static Dish)
Deployment Sensors: GPS, Tilt Sensors
MAXIMUM MOUNT ROTATION
Elevation: 140°
Azimuth: 370°
Skew (Polarization): 190°
Max look angle at: +66°
MOTORS
3-Motor Axis: Elevation, Azimuth, Skew
Typical Motor Voltage: 3 Amps
Surge Motor Voltage: 6 Amps
SPEED
Deploying Elevation: 1° per second
Deploying Azimuth: 10° per second
Peaking: 12° per second
(Acquisition time is 4 to 7 minutes typical)
DIMENSIONS OF DISH
Length (Stowed): 53 Inches
Width (Stowed): 48 Inches
Height (Stowed): 12.5 Inches
Weight: 195lbs
CABLING
Transmit & Receive Cables: RG6
Electrical Data Interface Cable [Control Cable]: 9 conductor 18AWG 30'
ENVIRONMENT
Wind Deployed: 50-60 mph
Wind Stowed: 120 mph
Temperature: Operational from -40°F to 125°F
CONTROLLER
D3 Ethernet Controller
D3 Dimensions: 10"L x 7"W x 2"H
D3 Interface: D3-Ethernet to computer [crossover], or network
Software: Embedded; computer independent
Controller Voltage: 15V DC 6.6 Amp, 500mAMP
Modem Compatibility: DiRECWAY DW4020, DW6000, DW7000,
DW7700 [no DW4000]; iDirect; UNASAT
D2 Ethernet Controller
D2 Dimensions: D2 Dimensions: 10"L x 11"W x 2"H
D2 Interface: D2-Ethernet to computer [crossover], or network
Software: Embedded; computer independent
Controller Voltage: 15V DC 6.6 Amp, 500mAMP
Modem Compatibility: DiRECWAY DW4020, DW6000, DW7000,
DW7700 [no DW4000]; iDirect
D1 Serial Controller
D1 Dimensions: 12"L x 8"W x 1"H
D1 Interface: D1-Serial to computer
Software: Windows only compatible
Controller Voltage: 15V DC 6.6 Amp
Modem Compatibility: DiRECWAY DW4000, DW4020
MODEM REQUIREMENTS
DiRECWAY: DW4000 [with D1 serial controller], DW4020, DW6000,
DW7000, DW7700
iDirect platform compatible
UNASAT platform compatible
|
Click here to see the F3 operations envelope.
DataStorm F3 Technical Specs
REFLECTOR TYPE
Efficiency: 70%
Midband Gain:(14.125 Tx, 11.725 Rx); RX-41.5 dBi, TX-43 dBi
Noise Temperature: Typical, 58K@10°EL, 53K@30°EL
Focal Length: 30 in/76.2 cm
f/D: 0.8
Offset Angle: 22°
Polarization: Transmitter Rotation (Static Dish)
Deployment Sensors: GPS, Tilt Sensors
MAXIMUM MOUNT ROTATION
Elevation: 140°
Azimuth: 370°
Skew (Polarization): 190°
Max look angle at: +66°
MOTORS
3-Motor Axis: Elevation, Azimuth, Skew
Typical Motor Voltage: 3 Amps
Surge Motor Voltage: 6 Amps
SPEED
Deploying Elevation: 1° per second
Deploying Azimuth: 10° per second
Peaking: 12° per second
(Acquisition time is 4 to 7 minutes typical)
DIMENSIONS OF DISH
Length (Stowed): 64 Inches
Width (Stowed): 48 Inches
Height (Stowed): 12.5 Inches
Weight: 195lbs
CABLING
Transmit & Receive Cables: RG6
Electrical Data Interface Cable [Control Cable]: 9 conductor 18AWG 30'
ENVIRONMENT
Wind Deployed: 50-60 mph
Wind Stowed: 120 mph
Temperature: Operational from -40°F to 125°F
CONTROLLER
D3 Ethernet Controller
D3 Dimensions: 10"L x 7"W x 2"H
D3 Interface: D3-Ethernet to computer [crossover], or network
Software: Embedded; computer independent
Controller Voltage: 15V DC 6.6 Amp, 500mAMP
Modem Compatibility: DiRECWAY DW4020, DW6000, DW7000,
DW7700 [no DW4000]; iDirect; UNASAT
D2 Ethernet Controller
D2 Dimensions: D2 Dimensions: 10"L x 11"W x 2"H
D2 Interface: D2-Ethernet to computer [crossover], or network
Software: Embedded; computer independent
Controller Voltage: 15V DC 6.6 Amp, 500mAMP
Modem Compatibility: DiRECWAY DW4020, DW6000, DW7000,
DW7700 [no DW4000]; iDirect
D1 Serial Controller
D1 Dimensions: 12"L x 8"W x 1"H
D1 Interface: D1-Serial to computer
Software: Windows only compatible
Controller Voltage: 15V DC 6.6 Amp
Modem Compatibility: DiRECWAY DW4000, DW4020
MODEM REQUIREMENTS
DiRECWAY: DW4000 [with D1 serial controller], DW4020, DW6000,
DW7000, DW7700
iDirect platform compatible
UNASAT platform compatible
|